Accessing a SAP ERP system using TeamViewer VPN, for establishing a virtual private network (VPN) between a local computer and a remote server (partner), is a relatively simple and cheap method. The major prerequisite for the use of TeamViewer VPN is that TeamViewer is installed on both sides with the option “Use TeamViewer VPN“.
It has to be noted at this point that TeamViewer VPN assigns its own IPs for both the local and the remote computer, in the form of 7.x.x.x, and that communication is only possible between these 2 IPs. Thus, you cannot ping the IP of another remote computer, either if this is in the form of 7.x.x.x (assigned by TeamViewer) or in the usual form (i.e. 10.40.248.21).
The parameters for using TeamViewer VPN from command line are:
TeamViewer.exe -i <ID> --Password <Password> -m vpn, i.e.
TeamViewer.exe -i 12345678 --Password welcome -m vpn
Password is an optional parameter. However, if it is not entered, you will be asked upon each connection.
The parameters for opening SAP GUI from command line, so as to create a direct TCP connection, are:
sapgui /H/<Server IP>/S/<Port No.>, i.e.
<Server IP> refers to the 7.x.x.x IP assigned by TeamViewer on the remote computer, which remains the same as long as TeamViewer ID doesn’t change, and <Port No.> refers to the SAP ERP system’s port number (i.e. 32xx, 33xx).
In my case, I had to simplify access because of more than 10 SAP ERP systems under the same project. As a result, I wrote a script file using VBScript that uses TeamViewer VPN to establish the required connection and open SAP GUI for connecting to the respective SAP ERP system. This step is fairly easy, so I suggest using it in similar scenarios, since you do not need to always look for the connection parameters.
- Declare and instantiate the WshShell object:
Set objShell = WScript.CreateObject("WScript.Shell")
- Run the TeamViewer application (using the Run method) to establish VPN connection:
objShell.Run """C:\Program Files\TeamViewer\Version6\TeamViewer.exe"" -i " & strTeamId & " --Password " & strTeamPass & " -m vpn", , True
“strTeamId” is the TeamViewer ID and “strTeamPass” is the TeamViewer password
- Run the SAP GUI application (using the Run method):
objShell.Run "sapgui /H/" & strSysTvIP & "/S/" & strPortNo, , True
“strSysTvIP” is the remote computer’s IP (7.x.x.x) and “strPortNo” is the system’s port number
Due to corporate licensing, in order to establish the necessary VPN connection I used v6.0, instead of the latest v7.0 of TeamViewer. However, there is not any key difference in the procedure described apart from the installation directory, which needs to me modified accordingly. For further information regarding TeamViewer VPN, you can refer to the manual of either v6.0 or v7.0.